TIRE SEALANT & INFLATOR

This special formula inflates flat fires immediately. Eliminates fire changing and the use of tools and jacks. Saves time and does not effect tire balance. Tire inflator will seal most punctures and inflate tire to 20 lbs. (240 kPa) pressure.

DIRECTIONS:

Apply the white warming sticker to the front of this can to the tire near the salve stem. Notify repairman that tire contains extremely flammable gas which MUST BE REMOVED in a well-ventilated area free of sparks, flames, and smoking. Shake well before using. Tire valve should be at 5 or 7 o’clock position. Screw hose nozzle on tire valve. Remove cap, hold can upright, push button on top. Tire will seal and inflate in less than 1 minute. Unscrew nozzle from tire and drive car slowly (max. 10mph/30 kph) for 2 miles (3km) to spread sealant. Sealing and inflating cannot be expected if there is a faulty valve or valve extension major tire and drive car slowly (max.10mph/30kph) for 2 miles (3km) to spread sealant. Sealing and inflating cannot

be expected if there is a faulty valve or valve extension. major tire damage. or if the tire is separated from the rim. If Tire inflator is used at less than 30℉(-1℃), warm can with car heater before using (do not apply to open flame).